AG-TUF® / AG-TUF® UV
|Corrugated PVC Liner Panels for Ag and Industrial Applications|
Owners of agricultural and light industrial buildings will appreciate Ag-Tuf for its remarkable durability, ease of installation, and outstanding versatility. Engineered for agricultural and industrial applications, these lightweight corrugated PVC panels are a breeze to handle, and require no special equipment to install. Ag-Tuf offers excellent resistance to harsh chemicals, fire, and impact. Ag-Tuf is easy to clean using conventional pressure washing equipment.
Canadian National Building Code Compliance
Palram has successfully completed the evaluation process to verify that it’s Ag-Tuf corrugated PVC liner panels meet the requirements of the National Farm Building Code (NFBC) 1995. The Canadian Construction Materials Centre (CCMC
) conducted the tests and issued Evaluation Report #13581-R
, specifically relating to Wall Liner applications in agricultural buildings. The 1995 NFBC provides relaxations of the requirements in the National Building Code (NBC) to address the particular needs of farm buildings. This is a required approval for sales of construction materials in the Canadian agricultural market.
- Attractive high-gloss white finish
- Excellent chemical resistance
- High fire resistance
- Easy cleaning & maintenance
- Great economical alternative to metal
- Excellent light reflectance
- Impact-resistant (resists breakage)
- Will not rust or corrode
- Resists scuffing and scratching
- Hog, Dairy, and Poultry Shelters
- Food Processing & Meat Packing
- Salt & Fertilizer Storage
- Loafing Sheds
- Aquaculture Farms
- Kennels and Stables
- Car & Truck Washes
- Factories & Industrial Buildings
Other InformationAg-Tuf corrugated PVC products are sold through metal building manufacturers and component suppliers throughout North America. Ag-Tuf may also available on a limited basis through some lumberyards and home improvement centers.
Outside of North America, Ag-Tuf is typically marketed as Palruf Industrial.
Do I really need to buy Palram's recommended closure strips and screws?
In order to ensure long-term warranty coverage, it is highly recommended to use Palram-approved fasteners and accessories. Palram corrugated products, fasteners and accessories should be thought of as a system meant to provide the best possible installation. Proper use of the complete system (panels, closure strips, fasteners, etc.) greatly reduces the possibility of problems and insures that product warranty will be honored. Please see the installation instructions for the specific product for details.
Why can't I just nail the panels into place?
There are a couple of problems with nailing Palram panels. First, there is significant possibility for impact damage to the panel in the area of the attachment. Second, nailing the panels in place prevents them from safely expanding and contracting with temperature change, resulting in warping of the product. Please be sure to read the installation instructions available on each product's document page on this website.
Why do I have to predrill fastener holes?
Predrilling the holes insures the panels will have room to expand and contract properly with temperature change. Skipping this step can lead to distorted or warped panels. Please be sure to read the installation instructions located on the specific product's document page.
How do I cut these panels?
Corrugated and Multi-wall panels may be cut with a circular saw (using a very fine-toothed blade for plastic panels, veneer, or plywood). For best results, it is often better to cut a few corrugated panels at a time to reduce vibration; clamping the panels also helps. Also, if using a standard circular saw blade, better results may be seen by running the blade backwards (turn it over to reverse direction). Panels may also be cut by hand by carefully using tin snips or a utility knife. For other cutting instructions and further details, please visit each product's document page. You can also view our general Corrugated Products Installation Overview video
Do Palram products keep the "heat" out?
Palram products are available in a variety of colors (varies by product), each with its own heat and light transmission properties. While all Palram panels block virtually 100% of harmful UV radiation, there are variations in heat and light transmission.
Clear panels allow most solar light and heat through while lighter, opaque colors are more reflective. If excessive heat buildup is a concern, our "Solar Control" panels are you're best bet. Please see each product page for more information on color offerings, light transmission percentages and warranty terms.
How long do the panels last?
Palram manufactures a variety of different products for different applications. Most have industry-leading warranties against manufacture-related defects, as well as specific warranties related to the intended use for the product. However, with proper installation and maintenance, we expect our products to far exceed the warranty periods.
Many of our products are engineered to be installed outdoors and are warranted accordingly. Nevertheless, the lifespan of outdoor products can be affected by how well they were installed, as well as environmental factors like air pollution, winds, and erosion by sand particles.
Warranty details can be found in the Downloads tab under the Warranties section at the bottom of the page for each individual product.
My building inspector says I need to know your flame spread rating. Can you provide this information?
Yes. We can provide test reports and other such documents. Please contact your Palram Dealer if you require these data, or Contact Us
. This is technical data and is not to be considered a warranty.
In roofing with corrugated panels, where should I start?
You can choose to install left to right, or right to left, or start at the middle and continue to both sides. It is recommended to always advance against the dominant wind at the site. Never start at both sides, or at any two separate points.
In roofing with corrugated panels, should I insert screws at the corrugation valley or crest points?
Crest fastening is always be preferred, but some corrugated product require fastening in the corrugation valley. See the individual Installation Guide for each product to see specific instructions.
Is it OK to screw in fasteners using a power screwdriver or screw gun?
Adjustable electric screwdriver is allowed, provided you set the torque to the minimal needed, in order to prevent over-tightening and local deformation of the panel. For that reason, pneumatic tools should be avoided.
How should I store packed sheets?
Store in a protected, shaded, ventilated site, with no direct exposure to sunlight and winds. In outdoor temporary storage cover with opaque protective film, and avoid PVC films and heat-absorbing materials. Please note: Surface protective films that cover sheets are highly sensitive to heat and direct sunlight. Excessive heat and direct sunlight before taking off the film can cause that film to bond the sheet surface, after which it will not be practically possible to remove it from the sheet!
Can the sheets be curved?
Yes. Sheets can be cold-curved and serve in arched shapes, provided the relevant Palram specifications for minimum radius in cold curving are followed. These specifications can be found in the Installation Instructions of the relevant sheets.
Solid sheets can be cold-curved in any direction.
Corrugated sheets can be arched so that the corrugations themselves are curved (lengthwise).
Multi-wall sheets can be arched so that the actual ribs will be curved (lengthwise).
Curving is not recommended across the ribs direction.
Can I recycle my old polycarbonate or PVC panels?
Palram's Polycarbonate and PVC sheet products are recyclable. Many cities and towns have recycling programs that include curbside pick-up. If so, Polycarbonate products such as SUNTUF, SUNLITE, PALSUN, DYNAGLAS, or THERMAGLAS should be marked "Plastic #7" prior to recycling. PVC products such as PALRUF, AG-TUF, PALOPAQUE, PALCLEAR, or PALIGHT, should be marked "Plastic #3".
If local recycling is not available, other resources are available:
For PVC products, visit the Vinyl Institute's Recycling Provider Database:
For polycarbonate products, visit The Association of Post Consumer Plastic Recyclers site and download their materials buyers and seller's list: