|Free Foam Cellular PVC for Construction Applications|
Trimboard is used for a variety of Interior or Exterior Trim Applications. Palight is a flat, rigid, extruded free-foamed PVC sheet with full UV protection and a 30-year transferable warranty*. PALIGHT Trimboard offers all the workability of wood, but with none of the drawbacks.
Trimboard is widely used in North America and is growing in popularity worldwide. For a more in-depth overview of the Palight Trimboard product line, including Palight ProFinish™ Profiles and Mouldings, visit our dedicated micro-site at PalightTrimboard.com
- Excellent UV resistance
- Durable, never rots
- Easy to paint & maintain
- Excellent mechanical properties
- Good insulation, lower heat transmission
- Easily worked with conventional tools and paints
- Can be easily bonded, formed, nailed, and bolted
- High chemicals and humidity resistance
- Not degraded by insect damage
- Bead board
- Deck fascia
- Stair risers
- Window trim
- Palight® ProFinish Concealing Profiles
- Palight® ProFinish Mouldings
Visit the palighttrimboard.com
microsite for a complete overview of Palight Trimboard.
International Building Code Compliance
Why do I have to predrill fastener holes?
Predrilling the holes insures the panels will have room to expand and contract properly with temperature change. Skipping this step can lead to distorted or warped panels. Please be sure to read the installation instructions located on the specific product's document page.
Do Palram products keep the "heat" out?
Palram products are available in a variety of colors (varies by product), each with its own heat and light transmission properties. While all Palram panels block virtually 100% of harmful UV radiation, there are variations in heat and light transmission.
Clear panels allow most solar light and heat through while lighter, opaque colors are more reflective. If excessive heat buildup is a concern, our "Solar Control" panels are you're best bet. Please see each product page for more information on color offerings, light transmission percentages and warranty terms.
How long do the panels last?
Palram manufactures a variety of different products for different applications. Most have industry-leading warranties against manufacture-related defects, as well as specific warranties related to the intended use for the product. However, with proper installation and maintenance, we expect our products to far exceed the warranty periods.
Many of our products are engineered to be installed outdoors and are warranted accordingly. Nevertheless, the lifespan of outdoor products can be affected by how well they were installed, as well as environmental factors like air pollution, winds, and erosion by sand particles.
Warranty details can be found in the Downloads tab under the Warranties section at the bottom of the page for each individual product.
My building inspector says I need to know your flame spread rating. Can you provide this information?
Yes. We can provide test reports and other such documents. Please contact your Palram Dealer if you require these data, or Contact Us
. This is technical data and is not to be considered a warranty.
How should I store packed sheets?
Store in a protected, shaded, ventilated site, with no direct exposure to sunlight and winds. In outdoor temporary storage cover with opaque protective film, and avoid PVC films and heat-absorbing materials. Please note: Surface protective films that cover sheets are highly sensitive to heat and direct sunlight. Excessive heat and direct sunlight before taking off the film can cause that film to bond the sheet surface, after which it will not be practically possible to remove it from the sheet!
Why are there polyethylene films on certain sheets and should I peel it off?
The surface films in certain sheets, like Sunlite
sheets, are needed for protection against dirt and scratching, and also used to carry important information to the installer and final customer. The indication of the UV protected side that should be installed facing outwards is extremely important.It is recommended to peel off the protective films only after installation. In case this will not be feasible and the film will be peeled off before laying the sheets, it must be remembered to at least mark the UV protected surface, so that the sheet will not be installed inside out.
wrong installation damages are not covered by Palram.Please also note: Surface protective films that cover sheets are highly sensitive to heat and direct sunlight. Excessive heat and direct sunlight before taking off the film can cause gluing of that film to the sheet surface, after which it will not be practically possible to remove it from the sheet!
Can I recycle my old polycarbonate or PVC panels?
Palram's Polycarbonate and PVC sheet products are recyclable. Many cities and towns have recycling programs that include curbside pick-up. If so, Polycarbonate products such as SUNTUF, SUNLITE, PALSUN, DYNAGLAS, or THERMAGLAS should be marked "Plastic #7" prior to recycling. PVC products such as PALRUF, AG-TUF, PALOPAQUE, PALCLEAR, or PALIGHT, should be marked "Plastic #3".
If local recycling is not available, other resources are available:
For PVC products, visit the Vinyl Institute's Recycling Provider Database:
For polycarbonate products, visit The Association of Post Consumer Plastic Recyclers site and download their materials buyers and seller's list: