Palram Americas
Advanced Product Search   
Type:
Material:
Transparency:
International / EU
Palram.com

Palram Americas (North American Site)
PalramAmericas.com
Other Regional Sites
Mexico/Cen. & So. America
Brazil (Portuguese)
France
Germany
Spain/Portugal
Russia/CIS
 
India
Israel
Australia/Oceania
Product Specific Sites
PalramProjects.com
Mirrite.com

PalightTrimboard.com
EconoTrim.com
PalramApplications.com (Assembly Kits)
Home    Products    Flat Sheets    PALIGHT® Product Family    PALIGHT EPS

PALIGHT EPS

Foamed PVC Economical Print Substrate

PALIGHT EPS is a value-oriented foam PVC for digital and screen printers, display builders, and fabricators.

PALIGHT EPS is formulated to provide great performance for everyday, competitively-priced digital or silk-screen print applications, and is also a good choice for cost-sensitive display and fabrication projects that do not require the added performance and rigidity of Palight Premium or Palight Outdoor.

Main Benefits
  • Value-oriented for cost sensitive projects
  • Bright white, smooth surface with uniform thickness
  • Good adhesion of ink and paint
  • Available in 3mm & 6mm thicknesses and 4' x 8' sheets
  • Slightly lighter weight than our PALIGHT Premium Foam PVC
  • Manufactured with nearly 50 years of PVC production experience
Typical Applications
  • Displays
  • Signage
  • Promotional decoration
  • Display cladding
Other InformationPalight EPS is available through a variety of sign supply distributors and industrial plastics distributors throughout North America. Ask your favorite supplier for Palight Premium, or contact Palram Americas at 800-999-9459 for a dealer near you.
Why do I have to predrill fastener holes?
Predrilling the holes insures the panels will have room to expand and contract properly with temperature change. Skipping this step can lead to distorted or warped panels. Please be sure to read the installation instructions located on the specific product's document page.
Do Palram products keep the "heat" out?
Palram products are available in a variety of colors (varies by product), each with its own heat and light transmission properties. While all Palram panels block virtually 100% of harmful UV radiation, there are variations in heat and light transmission.

Clear panels allow most solar light and heat through while lighter, opaque colors are more reflective. If excessive heat buildup is a concern, our "Solar Control" panels are you're best bet. Please see each product page for more information on color offerings, light transmission percentages and warranty terms.
How long do the panels last?
Palram manufactures a variety of different products for different applications. Most have industry-leading warranties against manufacture-related defects, as well as specific warranties related to the intended use for the product. However, with proper installation and maintenance, we expect our products to far exceed the warranty periods.

Many of our products are engineered to be installed outdoors and are warranted accordingly. Nevertheless, the lifespan of outdoor products can be affected by how well they were installed, as well as environmental factors like air pollution, winds, and erosion by sand particles.

Warranty details can be found in the Downloads tab under the Warranties section at the bottom of the page for each individual product.
My building inspector says I need to know your flame spread rating. Can you provide this information?
Yes. We can provide test reports and other such documents. Please contact your Palram Dealer if you require these data, or Contact Us. This is technical data and is not to be considered a warranty.
How should I store packed sheets?
Store in a protected, shaded, ventilated site, with no direct exposure to sunlight and winds. In outdoor temporary storage cover with opaque protective film, and avoid PVC films and heat-absorbing materials. Please note: Surface protective films that cover sheets are highly sensitive to heat and direct sunlight. Excessive heat and direct sunlight before taking off the film can cause that film to bond the sheet surface, after which it will not be practically possible to remove it from the sheet!
Why are there polyethylene films on certain sheets and should I peel it off?
The surface films in certain sheets, like Sunlite and Palsun sheets, are needed for protection against dirt and scratching, and also used to carry important information to the installer and final customer. The indication of the UV protected side that should be installed facing outwards is extremely important.It is recommended to peel off the protective films only after installation. In case this will not be feasible and the film will be peeled off before laying the sheets, it must be remembered to at least mark the UV protected surface, so that the sheet will not be installed inside out.

Note: wrong installation damages are not covered by Palram.Please also note: Surface protective films that cover sheets are highly sensitive to heat and direct sunlight. Excessive heat and direct sunlight before taking off the film can cause gluing of that film to the sheet surface, after which it will not be practically possible to remove it from the sheet!
Can the sheets be curved?
Yes. Sheets can be cold-curved and serve in arched shapes, provided the relevant Palram specifications for minimum radius in cold curving are followed. These specifications can be found in the Installation Instructions of the relevant sheets.

Solid sheets can be cold-curved in any direction.

Corrugated sheets can be arched so that the corrugations themselves are curved (lengthwise).

Multi-wall sheets can be arched so that the actual ribs will be curved (lengthwise).

Curving is not recommended across the ribs direction.
If polycarbonate sheets block UV radiation, why is there a ‘UV side’ to face outwards?
Polycarbonate (PC) inherently blocks UV radiation by absorbing it and not allowing it to pass through the panel. However, the absorption of UV also degrades polycarbonate, therefore, the sheet(s) has to be protected against UV radiation. Most Palram PC products feature a very thin co-extruded layer of UV-resistant PC resins that protect the entire sheet from UV radiation. In most cases, UV protection is applied to one side, however, two-sided UV protection is available for select products. 

In order to ensure the protection of single-sides UV protected sheets, they must be installed with the marked UV protective layer facing out toward the sun. Although sheet products can also be UV protected on both sides, most of the sheets are protected on one side that is marked clearly.
Can I recycle my old polycarbonate or PVC panels?
Palram's Polycarbonate and PVC sheet products are recyclable. Many cities and towns have recycling programs that include curbside pick-up. If so, Polycarbonate products such as SUNTUF, SUNLITE, PALSUN, DYNAGLAS, or THERMAGLAS should be marked "Plastic #7" prior to recycling. PVC products such as PALRUF, AG-TUF, PALOPAQUE, PALCLEAR, or PALIGHT, should be marked "Plastic #3".

If local recycling is not available, other resources are available:
For PVC products, visit the Vinyl Institute's Recycling Provider Database:
http://www.vinylinfo.org/Recycling/VinylRecyclingDirectory.aspx
For polycarbonate products, visit The Association of Post Consumer Plastic Recyclers site and download their materials buyers and seller's list:
http://www.plasticsrecycling.org?
PALIGHT EPS
Palight® EPS offers digital printers an excellent, value-oriented substrate for competitively-priced jobs. It offers excellent ink adhesion and a relatively high white index, when compared to imports or other inexpensive products. It's also made in the USA by a company that has more than 50 years experience manufacturing PVC products.
PALIGHT EPS
Palight® EPS offers digital printers an excellent, value-oriented substrate for competitively-priced jobs. It offers excellent ink adhesion and a relatively high white index, when compared to imports or other inexpensive products. It's also made in the USA by a company that has more than 50 years experience manufacturing PVC products.
PALIGHT EPS
Palight® EPS make an excellent, value-oriented substrate for competitively-priced printed vynil lamination jobs. It offers a smooth, consistent surface and it's also made in the USA by a company that has more than 50 years experience manufacturing PVC products.