Do I really need to buy Palram's recommended closure strips and screws?
In order to ensure long-term warranty coverage, it is highly recommended to use Palram-approved fasteners and accessories. Palram corrugated products, fasteners and accessories should be thought of as a system meant to provide the best possible installation. Proper use of the complete system (panels, closure strips, fasteners, etc.) greatly reduces the possibility of problems and insures that product warranty will be honored. Please see the installation instructions for the specific product for details.
Why can't I just nail the panels into place?
There are a couple of problems with nailing Palram panels. First, there is significant possibility for impact damage to the panel in the area of the attachment. Second, nailing the panels in place prevents them from safely expanding and contracting with temperature change, resulting in warping of the product. Please be sure to read the installation instructions available on each product's document page on this website.
Why do I have to predrill fastener holes?
Predrilling the holes insures the panels will have room to expand and contract properly with temperature change. Skipping this step can lead to distorted or warped panels. Please be sure to read the installation instructions located on the specific product's document page.
How do I cut these panels?
Corrugated and Multi-wall panels may be cut with a circular saw (using a very fine-toothed blade for plastic panels, veneer, or plywood). For best results, it is often better to cut a few corrugated panels at a time to reduce vibration; clamping the panels also helps. Also, if using a standard circular saw blade, better results may be seen by running the blade backwards (turn it over to reverse direction). Panels may also be cut by hand by carefully using tin snips or a utility knife. For other cutting instructions and further details, please visit each product's document page. You can also view our general Corrugated Products Installation Overview video
What are purlins and closure strips?
Purlins are cross members, or horizontal supporting members, running across the rafters of your structure. Suntuf, Palruf, Sun 'N Rain, and Suntop panels are fastened to purlins. Closure strips match the corrugation pattern of the panels and are attached to the purlins. Closure strips can be made of wood, foam, or plastic. Please see each product's document page for complete installation information.
Do Palram products keep the "heat" out?
Palram products are available in a variety of colors (varies by product), each with its own heat and light transmission properties. While all Palram panels block virtually 100% of harmful UV radiation, there are variations in heat and light transmission.
Clear panels allow most solar light and heat through while lighter, opaque colors are more reflective. If excessive heat buildup is a concern, our "Solar Control" panels are you're best bet. Please see each product page for more information on color offerings, light transmission percentages and warranty terms.
How long do the panels last?
Palram manufactures a variety of different products for different applications. Most have industry-leading warranties against manufacture-related defects, as well as specific warranties related to the intended use for the product. However, with proper installation and maintenance, we expect our products to far exceed the warranty periods.
Many of our products are engineered to be installed outdoors and are warranted accordingly. Nevertheless, the lifespan of outdoor products can be affected by how well they were installed, as well as environmental factors like air pollution, winds, and erosion by sand particles.
Warranty details can be found in the Downloads tab under the Warranties section at the bottom of the page for each individual product.
My building inspector says I need to know your flame spread rating. Can you provide this information?
Yes. We can provide test reports and other such documents. Please contact your Palram Dealer if you require these data, or Contact Us
. This is technical data and is not to be considered a warranty.
Do Palram accessories come in all of the same colors the panels do?
No. Palram accessories are available in some standard colors, and they may need to be specially ordered depending on your retailer.
In roofing with corrugated panels, where should I start?
You can choose to install left to right, or right to left, or start at the middle and continue to both sides. It is recommended to always advance against the dominant wind at the site. Never start at both sides, or at any two separate points.
Is it OK to screw in fasteners using a power screwdriver or screw gun?
Adjustable electric screwdriver is allowed, provided you set the torque to the minimal needed, in order to prevent over-tightening and local deformation of the panel. For that reason, pneumatic tools should be avoided.
Is it OK to walk over roofing sheets while in storage, during or after installation?
No. In case it can’t be avoided during installation. It's recommended to use a crawl board that is strong enough to support the weight of the person, and that spans at least three purlins or supporting members.